Category Home Improvement

How to pick home security features- Insights

Home security is fast becoming an important topic of concern here in America. As the economy worsens, the crime rate for burglaries and robberies is rising. The local news has stories almost daily of break-ins at homes and business in which the predominant method of entry is kicking in one of the exterior doors. Checkout how to pick home security features for more info. Over the years I have spent as an insurance adjuster, I’ve been to at least a hundred homes to investigate burglaries and help the homeowners prepare their insurance claim. Seldom have I found incidents where the burglar came in through a window. Burglars nearly always make their entry through a door. Most people use deadbolt locks and their first line of defense. Nothing wrong with that. I’ve never seen a deadbolt lock fail. The deadbolt is not the weakest link in the chain when it comes to securing an exterior door. The weak link is the door jamb. For you that are unfamiliar with the term “jamb,” it is the frame to which the door is mounted by hinges. When you turn the key the deadbolt lock throws a steel bolt into a latch on the jamb.

For tens of millions of homes, apartments and businesses, the exterior door jamb is made of wood. In residential applications, the door jamb usually has a thickness of ¾”. Sometimes exterior door jambs can have a 1 ½” thickness. The screws that mount the latchplate onto the jamb are usually ¾” wood screws, and are usually about 1″ away from the edge of the jamb. So, when a bad guy kicks your door, there is only about 1″ of wood in the jamb offering any resistance. One inch of pine wood, or even oak, does not give you much protection. In almost every burglary claim I’ve handled where the burglar came in through a door, it was the wood door jamb that failed…usually on about the second kick. And the cost of replacing a damaged door and jamb can easily run $750 – $1,000. The best solution to securing your exterior doors against break-in would be to install steel jambs and steel doors. However, that can be very expensive. Sliding glass doors are also an easy entry point for thieves. Placing a dowel, bar or stick in the track does not prevent your door from being lifted out of the track. There is another solution that is cost effective and works great!

Tips for deciding when to replace your roof for your house- A Guide

When it comes to remodeling your house, most people tend to neglect the roof of their houses. And it is the roof of the house that suffers the maximum effect of the environmental extremities such as severe rain, snow, winds, dust and debris, causing the roofing materials to experience more wear and tear than any other part of the house.Come watch and join us at tips for deciding when to replace your roof for your house.

Let us discuss some of the factors you need to consider while hiring roofing contractors:

Experience: The most important aspect that you need to consider is the amount of experience the roofing contractor you plan to hire has in the concerned field. It is extremely important that they have several years of experience in the industry of roofing and construction. In addition, it is also important to check the kind of specialization they have. A contractor having extensive experience in composite roofs can not possibly help you if you want to remodel a tile roof.

Reputation: You would find innumerable roofing contractors in the market. It is extremely important to check the reputation of a contractor and the quality of services they provide before you hire them, in order to avoid any future disappointments.

Pricing: Make a list of reputed roofing contractors and take a cost estimate for each of them for the roofing services they would provide. It is also important to check if the products and materials they would use are warranted.

License: Before hiring a roofing contractor, it is extremely important to make sure that they are licensed and has the authority to work in the field.

Local Contractor: It can be extremely beneficial to choose local contractors for your roofing requirements. This is because they have thorough knowledge about the local weather extremities and other conditions that can weaken or damage your house roofs. They are also better aware of the roofing materials and designs that would be best suited for the houses in your area.

Home Security- Guide

A recent University study showed locks make 98 percent of the individuals feel safe. You can’t however, install locks everywhere. Doggie doors for example, can’t be locked. You can’t lock your kitchen, washing area and shed etc. Is there any way out to this? Yes, although you can’t lock everything at home; but you can certainly arm your home with a home security system.Have a look at these tips for more info on this.

Home Security Systems are Like Locks

Home security systems are like ‘invisible locks’ to your homes. There are devices that the best home alarm systems offer. These devices offer 24-hour detection. In case, there is a threat, the loud alarm will be triggered for your security. The alarm signal will reach the monitoring team sitting at the backend. The trained monitoring consultants would assess the situation. After alarm confirmation, they dispatch you the right type of help you need.

How to Improve Your Home Security

Now the question is how one can improve their home security. The answer is simple. Make sure your home is hard to break in. Use technology to beat the invaders. Know your surrounding areas and the people around you. Here are some of these strategies for different parts of your house:

-Entryway Security

An FBI estimate shows 34 percent burglars enter through the front door. Police inform most break-ins occur when doors are not locked. Therefore, it is essential to make your entryway hard to invade. You can buy home entry products for this. These products are not dependent on keys. Install a smart door lock for your front door. Grab a keychain fob for keeping it handy to call help.

-Know Each Movement

Home invaders try to avoid confrontations. Therefore, most of them invade when you are not around. There is a security device that detects each movement and triggers. The device informs you about it even if you are away. It is called the smart motion sensor. Install it at all the sensitive areas of your home to protect them.

-Personal Safety

For your safety, keep the personal panic button with you. Panic button works even if you don’t have your smartphone to call for help. The panic alarm transmits the message to the monitoring team for your support.

-Keep an Eye

Train your kids and other family members to stay on the alert. Keep an eye on your surroundings. It is the best way to avoid any home invasion. To do this, mount HD Mobile Video Security Cameras on every side. Placement depends on the type of house you have. If you buy a home security package, you can get free video surveillance system and the certified technicians can install them at the right positions for you. To discuss more on home security, best devices and right placement, interact with us for free.

-Make It Hard to Runaway

In case, a ‘smart’ thief succeeds to enter your home. Make it hard for him to run away. Choose the best home automation alarm system so that the alarm system doesn’t let the criminal win.

Estate Agent today- Insights

Ten years ago, a search for real estate would have started in the office of a local real estate agent or by just driving around town. At the agent’s office, you would spend an afternoon flipping through pages of active property listings from the local Multiple Listing Service (MLS). After choosing properties of interest, you would spend many weeks touring each property until you found the right one. Finding market data to enable you to assess the asking price would take more time and a lot more driving, and you still might not be able to find all of the information you needed to get really comfortable with a fair market value. Today, most property searches start on the Internet. A quick keyword search on Google by location will likely get you thousands of results. If you spot a property of interest on a real estate web site, you can typically view photos online and maybe even take a virtual tour. You can then check other Web sites, such as the local county assessor, to get an idea of the property’s value, see what the current owner paid for the property, check the real estate taxes, get census data, school information, and even check out what shops are within walking distance-all without leaving your house!

While the resources on the Internet are convenient and helpful, using them properly can be a challenge because of the volume of information and the difficulty in verifying its accuracy. At the time of writing, a search of “Denver real estate” returned 2,670,000 Web sites. Even a neighborhood specific search for real estate can easily return thousands of Web sites. With so many resources online how does an investor effectively use them without getting bogged down or winding up with incomplete or bad information? Believe it or not, understanding how the business of real estate works offline makes it easier to understand online real estate information and strategies. Have a look at for more info on this.

The Business of Real Estate

Real estate is typically bought and sold either through a licensed real estate agent or directly by the owner. The vast majority is bought and sold through real estate brokers. (We use “agent” and “broker” to refer to the same professional.) This is due to their real estate knowledge and experience and, at least historically, their exclusive access to a database of active properties for sale. Access to this database of property listings provided the most efficient way to search for properties.

The MLS (and CIE)

The database of residential, land, and smaller income producing properties (including some commercial properties) is commonly referred to as a multiple listing service (MLS). In most cases, only properties listed by member real estate agents can be added to an MLS. The primary purpose of an MLS is to enable the member real estate agents to make offers of compensation to other member agents if they find a buyer for a property. This purposes did not include enabling the direct publishing of the MLS information to the public; times change. Today, most MLS information is directly accessible to the public over the Internet in many different forms. Commercial property listings are also displayed online but aggregated commercial property information is more elusive. Larger MLSs often operate a commercial information exchange (CIE). A CIE is similar to an MLS but the agents adding the listings to the database are not required to offer any specific type of compensation to the other members. Compensation is negotiated outside the CIE.


In most cases, for-sale-by-owner properties cannot be directly added to an MLS and CIE, which are typically maintained by REALTOR associations. The lack of a managed centralized database can make these properties more difficult to locate. Traditionally, these properties are found by driving around or looking for ads in the local newspaper’s real estate listings. A more efficient way to locate for-sale-by-owner properties is to search for a for-sale-by-owner Web site in the geographic area. What is a REALTOR? Sometimes the terms real estate agent and REALTOR are used interchangeably; however, they are not the same. A REALTOR is a licensed real estate agent who is also a member of the NATIONAL ASSOCIATION OF REALTORS. REALTORS are required to comply with a strict code of ethics and conduct.

MLS and CIE property listing information was historically only available in hard copy, and as we mentioned, only directly available to real estate agents members of an MLS or CIE. About ten years ago, this valuable property information started to trickle out to the Internet. This trickle is now a flood! One reason is that most of the 1 million or so REALTORS have Web sites, and most of those Web sites have varying amounts of the local MLS or CIE property information displayed on them. Another reason is that there are many non-real estate agent Web sites that also offer real estate information, including, for-sale-by-owner sites, foreclosure sites, regional and international listing sites, County assessor sites, and valuation and market information sites. The flood of real estate information to the Internet definitely makes the information more accessible but also more confusing and subject to misunderstanding and misuse.

Options for recovering your Atlanta home after a flood

When flood occur, getting started on cleaning flood damage and dealing with any water damage remediation will seem like an immediate, urgent need to anyone who finds themselves in this situation. While getting right to work on the cleanup process is always a good idea, those who must deal with this problem would do themselves a favor to take a minute or two to consider how it should be done so that it’s done right and it’s only done once. Below are a few ideas to keep in mind in regards to cleaning flood damage and handling water damage remediation.

Take Stock of What Needs to Be Moved
Most rooms that suffer from flood damage contain furniture and other items that sit on top of the floor and the carpet. Generally, everything in such a room will need to be moved, and rather than simply rearranging these items and jumping right into the water damage remediation step, homeowners should consider what needs to be moved and where. This step will only add to a more organized and efficient approach to cleaning flood damage and the water damage remediation. By clicking here we get info about options for recovering your Atlanta home after a flood.

Assume the Worst
When flood damage occurs, water generally seeps into every area possible both above and below the floor that we see. Therefore, those who have to deal with water damage remediation should plan for cleaning flood damage by assuming that everything from the top of the carpet to the area around and even beneath the floor boards will need to be properly dealt with in order to make sure that the worst case scenario does not play out. This scenario involves the growth and spread of mold, which can lead to permanent damage to any home’s structure and stability.

Work with Professionals
People will commonly deal with water damage remediation by removing the furniture, peeling back the carpet, attempting to dry the floor boards in some way and then cleaning and drying the carpet. While these steps are all necessary to some extent, this is the time to seek the professional help of those who spend years cleaning flood damage for clients. Depending on the specifics of your home, special steps could be necessary and special equipment could be critical in successfully repairing your floors and carpets to the point where they look like they did beforehand and to make sure that the possibility of mold growth is minimized.

Damage Restoration After a Flood

A flood can be incredible and getting damage restoration can be the only way for you to pull through an event like this. Many homeowners will face situations in which they have to deal with significant property destruction that can leave them facing large dollar amounts in lost investment. The good news is that if you have insurance, this type of flooding can be covered by your homeowner’s insurance. The bad news is that even if it is not, you still need to turn to a professional to get the level of care necessary to restore your home to a livable condition. Check out this site cost effective ways to cleanup a home after a flood

Clean Up First
The first step in most damage restoration projects having to do with a flood is to remove the water. Most of these companies will have suctioning devices that will effectively pull out the water especially if it is more than a few inches in height. This process is far faster than trying to let drains do the work for you. You also need to consider the process of removing all of the damaged property including all elements of the home’s structure that were saturated. This includes furniture, drywall, carpeting, and anything else that is impossible to repair through drying it out. Part of the cleanup may include monitoring or correcting concerns related to mold. Keep in mind that if a surface is wet for 18 hours or longer, it is possible for mold growth to begin. In that short of a period, it can also allow for mold to seep into the home’s ventilation, especially if it is running to help dry out the home, and spread throughout the space. This is definitely something you need a professional to handle.

Rebuilding Afterwards
Once the water is gone and the area is dry, you may be left with a shell of what was there. If that is the case, it is now time to rebuild it. You do not have to do this job on your own either. Rather, you can work with professionals who can help to rebuild the structural elements of the home for you including replacing flooring and drywall. This type of restoration work can be costly, but it allows you to get back to using your home again. Do not overlook the importance of using a professional service for damage restoration after a flood. Water may not seem like a problem until it comes rushing into your home uncontrollably. You may be faced with a significant problem and little help for avoiding it. The good news is that you can restore your home to the way it looked or even better with the aid of a professional service.

Window Installation Company Review

Windows are often the most defining features of a home. New windows can not only beautify your home both inside and out, they can also make your home more energy efficient, potentially saving you a fortune.All door glass will have to be tempered due to code. So any place you buy a glass insert that is anything close to reputable should always be using high quality glass. You can tell the difference between tempered glass and regular annealed glass by how it breaks. Some windows will have tempered glass in them if they are near a door or close to the ground.For the most part when glass breaks in a door it is pretty easy to remove. You can put down a tarp and tap the glass with a broom handle while standing back in safety. The tempered glass should just fall right off onto the ground. At that point you will realize there is a lot more glass in a door then you would normally think. Those doors way hundreds of pounds and having a professional company come out and take care of that replacement may be your only option.The most important thing a home owner can do to make sure they get the most accurate and best price is to grab a few details about their broken glass. Get the facts about Excellent Window Installation Company

1.Get an approximate size of the panel that’s broken. Don’t get to close and get cut, just measure the daylight(inside to inside of the frame where the glass is).

2.Get a Width and a Height in Inches.
3.Is it single or dual panel. That means one pane of glass thick, or 2 panes of glass in thickness!
4.Is there any color or tint to the glass. Bronze(brownish tint) is very common as is a slight green or blue tint(Low-E energy Efficient glass).
With that information you should be able to call a glass company and get a quick accurate quote on your patio door glass replacement.Pretty much all glass that is used in construction, installations, new window fabrications and glass replacements come from big manufacturers that have safety guidelines on the glass that they sell. Now most of the actual factories are in China but the quality of glass they produce must meet the strict American guidelines so that is not a worry.